Bally logo Bally Pinball Repair Service
AS-2518-XX Sound Boards
Bally logo

My services for the Bally sound boards are limited since I currently have no way to test them, nor can I replace any ROM chips that may be bad. I will offer more options once I get my bench set up (soon I hope). So what I'm offering here is more of a "tune-up" for your board. For a flat rate (plus return shipping), I'll install a new set of fresh, quality electrolytic capacitors, new trimmer pots, and new header pins.

If your board looks like any of the ones the picture below, then those capacitors are original and are probably over 15 years old. Electrolytics tend to dry out over time and new ones may just bring your board back to live, or at least perk it up. New trimmers will get rid of any scratchy noise you may have, and new header pins are always a good thing to do.

Here's a table of rates for each type of repair, and all prices include parts and labor.

I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.

AS-2518-32/50 Tune-Up
New electrolytic capacitors, trimmers, and header pins
$15.00
Other repairs
Audio amp, misc circuit fixes, etc.
$10.00
and up
Testing Fee
For any board deemed unrepairable
$5.00
.156" connectors, sold with any -32 tune-up
New housings, keys, and plenty of crimp-on pins (Your choice: standard or trifucon)
$4.50
each

AS-2518-51 Tune-Up
New electrolytic capacitors, trimmers, and header pins
$15.00
Other repairs
Audio amp, misc circuit fixes, etc.
$10.00
and up
Testing Fee
For any board deemed unrepairable
$5.00
.156" connectors, sold with any -50/51 tune-up
New housings, keys, and plenty of crimp-on pins (Your choice: standard or trifucon)
$4.50
each

AS-2518-62 (Squawk & Talk) Tune-Up
New electrolytic capacitors, trimmers, and header pins
$25.00
Other repairs
Audio amp, sound chips, 5V Regulator, misc circuit fixes, etc.
$10.00
and up
Testing Fee
For any board deemed unrepairable
$5.00
.156" connectors, sold with any -62 tune-up
New housings, keys, and plenty of crimp-on pins (Your choice: standard or trifucon)
$6.50
each

So feel free to send me your board(s) and I'll take a look and let you know what I think, then you can decide what to do from there. Probably a good idea if you e-mail me first, just so I know what to expect (remove the NO_S*P*A*M_).

Here's a picture of an AS-1825-32 after it got a tune-up.


And an AS-2518-50, before and after:
  


And an AS-2518-51, before and after:
  


And an AS-2518-61A (Squawk & Talk) after I gave it a tuneup:



Of course, there's always Ts & Cs (revised again), and don't forget prices DO NOT include shipping.

If you decide to "do it yourself", visit Big Daddy or GPE for all the parts you'll need.
I'll still fix it when you're done. :-)

Thanks!



[Steve's Page] [Pinball] [Steve's Bally Page] [Pinball Repair] [Bally Repair]



Created 12/10/05 - Last Modified 5/2/10 - Steve Kulpa Mail Icon   Nolensville, TN
Remove the NO_S*P*A*M_ to reply

All pictures posted on this page, unless otherwise noted, are the exclusive property of Steve Kulpa
and may not be borrowed, copied, downloaded, reproduced, or pilfered in any way with out prior permission