System-3/4/6 Power Supply
|
Williams Pinball Repair Service System-3/4/6 Power Supply |
|
All repair jobs include a good cleaning, repairing cracked header pin solder joints, and a complete bench test.
Here's a table of rates for each type of repair, and all prices include parts and labor. I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.
Minimum Charge - $10.00
| Board Upgrade (make your working board work better!) New fuses, filter capacitors, diodes, HV upgrade, header pins, and on-board connectors |
$36.00 |
| Rebuild 5-Volt Regulator and 28V Filter New regulator, diodes, fuse, and electrolytic capacitors (header pins extra) |
$30.00 |
| Rebuild/Upgrade 90-Volt Regulator New transisors, resistors, diodes, fuse, and electrolytic capacitors (header pins extra) |
$35.00 |
| Complete Overhaul Rebuild both regulators, new header pins and on-board connectors, and new fuses |
$60.00 |
| Replace ALL Header Pins and On-Board Connectors New locking header row plus the two Molex connectors on the board |
$12.00 |
| Spare Fuses A complete set of spares, including those in the back box (please mention which machine) |
$10.00 |
| Anything else Just in case I missed something, or your needs differ from above |
$10.00 & up plus parts |
| .156" connectors, sold with any repair New housings, keys, and plenty of trifurcon crimp-on pins |
$14.50 each |
| Testing Fee For any board deemed unrepairable |
$10.00 |
Minimum Charge - $10.00
All prices do not include return shipping
So feel free to send me your board(s) and I'll take a look and let you know what I think, then you can decide what to do from there. Probably a good idea if you e-mail me first, just so I know what to expect (remove the NO_S*P*A*M_).
Here's a picture of a Williams System-6 board that got an upgrade:
Of course, there's always Ts & Cs
(revised), and don't forget prices DO NOT include shipping.
If you decide to "do it yourself", visit
Big Daddy or
GPE
for all the parts you'll need.
I'll still fix it when you're done. :-)
Thanks!
Nolensville, TN
All pictures posted on this page, unless otherwise noted, are the
exclusive property of Steve Kulpa
and may not be borrowed, copied,
downloaded, reproduced, or pilfered in any way with out prior permission