Stern logo Stern Pinball Repair Service
SB-xxx Sound Boards
Stern logo

My services for the Stern sound boards are limited since I currently have no way to test them. If you want me to test your sound board, for now you'll have to send the MPU and MPU to Sound Board harness too. I'm working on adding these to my work bench, but for now you'll have to send your MPU board.

Here's a table of rates for each type of repair, and all prices include parts and labor.

I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.

SB-300 Tune-Up
New electrolytic capacitors and header pins
$20.00
Other repairs
Audio amp, ICs, misc circuit fixes, etc.
$10.00
and up
Testing Fee
For any board deemed unrepairable
$5.00
.156" connectors, sold with tune-up
New housings, keys, and plenty of crimp-on pins (Your choice: standard or trifucon)
$4.50
each

So feel free to send me your board(s) and I'll take a look and let you know what I think, then you can decide what to do from there. Probably a good idea if you e-mail me first, just so I know what to expect (remove the NO_S*P*A*M_).



Of course, there's always Ts & Cs (revised again), and don't forget prices DO NOT include shipping.

If you decide to "do it yourself", visit Big Daddy or GPE for all the parts you'll need.
I'll still fix it when you're done. :-)

Thanks!



[Steve's Page] [Pinball] [Steve's Stern Page] [Pinball Repair] [Stern Repair]



Created 8/12/09 - Last Modified 8/12/09 - Steve Kulpa Mail Icon   Nolensville, TN
Remove the NO_S*P*A*M_ to reply

All pictures posted on this page, unless otherwise noted, are the exclusive property of Steve Kulpa
and may not be borrowed, copied, downloaded, reproduced, or pilfered in any way with out prior permission