Bally logo Bally Pinball Repair Service
Lamp Driver 		Bally logo

Repairs on the Bally AS-2518-14 and AS-2518-23 Lamp Driver boards are straight forward and done on a flat rate basis. Any corrosion damage or repairs of burnt traces is extra. Plus your board will get a complete bench test. Click Here to learn how I test lamp driver boards.

Here's a table of rates for each type of repair, and all prices include parts and labor.

I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.

Bally AS-2518-14 Lamp Driver Boards
Repair to working 100%		 $30.00
flat rate
Bally AS-2518-23 Lamp Driver Boards
Repair to working 100%		 $25.00
flat rate
Testing Fee
For any board deemed unrepairable		 $5.00
Corrosion and/or major trace damage $5.00 & up
additional
.100" lamp driver connectors, sold with any repair (either style board)
New housings, keys, and plenty of crimp-on pins		 $12.00
each

All prices do not include return shipping

So feel free to send me your board(s) and I'll take a look and let you know what I think, then you can decide what to do from there. Probably a good idea if you e-mail me first, just so I know what to expect (remove the NO_S*P*A*M_).

Here's a picture of an AS-1825-14 that I recently repaired:


And AS-1825-23 too:



Of course, there's always Ts & Cs (revised again), and don't forget prices DO NOT include shipping.

If you decide to "do it yourself", visit Big Daddy or GPE for all the parts you'll need.
I'll still fix it when you're done. :-)

Thanks!



[Steve's Page] [Pinball] [Steve's Bally Page] [Pinball Repair] [Bally Repair]


Created 10/9/05 - Last Modified 5/7/09 - Steve Kulpa Mail Icon   Nolensville, TN
Remove the NO_S*P*A*M_ to reply

All pictures posted on this page, unless otherwise noted, are the exclusive property of Steve Kulpa
and may not be borrowed, copied, downloaded, reproduced, or pilfered in any way with out prior permission