Bally Pinball Repair Service 6-Digit Display Driver

I also ask that you pay return postage, which will be the going rate for U.S. Priority Flat Rate Priority, or International Priority, plus optional insurance.

Here's what you get for your $20.00:

• Replace 100K ohm resistors with 1/2 Watt replacements
• Replace header pins
• Repair any digit and/or segment problems
• Install a nipple protector if necessary
• Clean it up
• Complete bench test. Click Here to learn how I test display driver boards.

Bally 6- or 7-Digit Display Driver Repair to working 100%	$20.00 flat rate
Testing Fee For any board deemed unrepairable	$5.00
.156" connectors, sold with any repair New housing, key, and plenty of crimp-on pins	$4.00 each

All prices do not include return shipping

So feel free to send me your 6-digit displays(s) and I'll take a look and let you know what I think, then you can decide what to do from there. Probably a good idea if you e-mail me first, just so I know what to expect (remove the NO_S*P*A*M_).

If the nipple is broken or the glass is cracked on your display, don't bother sending it in for repairs as I don't repair or replace the actual display glass itself. If you BUY the glass somewhere else, then send it to me with the driver board, I can remove and replace the glass w/ the new one you supplied.

Here's what an AS-1825-21 looks like:

And an AS-2518-15:

And an AS-2518-58:

Of course, there's always Ts & Cs (revised again), and don't forget prices DO NOT include shipping.

If you decide to "do it yourself", visit Big Daddy or GPE for all the parts you'll need.
I'll still fix it when you're done. :-)

Thanks!