Everything You Ever Wanted to Know About
Strikes and Spares Solenoid and Lamp Assignments

The following table lists each driver transistor, the coil it drives,
the pre-driver IC associated with it along with the pin numbers of the base and collector (respectively),
and the decoder IC BINARY input signals (ABCD) and output pin number.

TIP-102
Transistor
Coil CA3081
Pre-Driver IC
74L154
Decoder*
Q1 10 Chime U1, 16, 1 0001/2
Q2 Not Used U1, 3, 2 0000/1
Q3 Knocker U1, 6, 4 0101/6
Q4 Out Hole Kicker U1, 8, 7 0110/7
Q5 100 Chime U1, 13, 14 0010/3
Q6 1000 Chime U1, 11, 12 0011/4
Q7 Extra Chime U1, 10, 9 0100/5
Q8 Saucer U3, 16, 1 0111/8
Q9 Bottom Pop Bumper U3, 3, 2 1010/11
Q10 Left Sling Shot U3, 8, 7 1011/13
Q11 Right Sling Shot U3, 6, 4 1101/15
Q12 Not Used U3, 10, 9 1100/14
Q13 Left Pop Bumper U3, 11, 12 1000/9
Q14 Right Pop Bumper U3, 13, 14 1001/10
Q15 Flipper Enable Relay U4, 3, 2 n/a
Q16 Not Used U4, 8, 7 1110/16
Q17 Not Used U4, 10, 9 n/a
Q18 Not Used U4, 11, 12 n/a
Q19 Coin Lockout U4, 13, 14 n/a

*NOTE*
"n/a" Decoder info indicates these drivers get their signals as continuous
solenoids directly from the MPU at A4J4-5, 6, 7, and 8 and not the Decoder IC.


This table lists all the 2N5060 SCRs on the Lamp Driver module, the name of the lamp it drives,
the decoder IC associated with the SCR along with the BINARY input signals (AD0, AD1, AD2, AD3) and output pin,
and the name of the 2K Ohm resistor (red/black/red) connected to the decoder output.

2N5060
SCR
Lamp MC14514
Decoder
2K Ohm
Resistor
Q4 Pin "9" U1, 0111/4 R7
Q5 Left Out Lane U1, 1101/13 R3
Q6 1st Player Up U1, 1110/16 R2
Q7 ABC Special U1, 1011/19 R1
Q11 Pin "5" U1, 0110/5 R8
Q12 Bonus 5K U1, 0001/9 R12
Q13 Bonus 9K U1, 0010/10 R13
Q14 Bonus 1K U1, 0000/11 R14
Q18 Right Out Lane U2, 1101/13 R15
Q19 2nd Player Up U2, 1110/16 R11
Q20 3X U3, 0111/4 R10
Q21 Spare Special U2, 1011/19 R9
Q25 Pin "10" U2, 0111/4 R22
Q26 Pin "6" U2, 0110/5 R23
Q27 Bonus 6K U2, 0001/9 R27
Q28 Bonus 10K U2, 0010/10 R28
Q29 Bonus 2K U2, 0000/11 R29
Q30 Left Return Lane U3, 1101/13 R30
    
2N5060
SCR
Lamp MC14514
Decoder
2K Ohm
Resistor
Q31 3rd Player Up U3, 1110/16 R26
Q32 Pin "7" U3, 0110/5 R25
Q36 Bonus 3K U3, 0000/11 R45
Q37 Pin "3" U3, 0101/6 R38
Q38 Bonus 7K U3, 0001/9 R41
Q39 5X U3, 1011/9 R24
Q43 Right Return Lane U4, 1101/13 R44
Q44 Bonus 20K U3, 0010/10 R43
Q45 4th Player Up U4, 1110/16 R42
Q46 Auto. Strike When Lit U4, 1001/17 R40
Q50 Bonus 8K U4, 0001/9 R55
Q51 Spinner U4, 0010/10 R56
Q52 Credit Indicator U4, 1010/20 R37
Q53 ABC 5000 U4, 1011/19 R39
Q57 Bonus 4K U4, 0000/11 R57
Q58 2X U4, 0111/4 R50
Q59 Pin "8" U4, 0110/5 R53
Q60 Pin "4" U4, 0101/6 R54


This table lists all the MCR-106 SCRs on the Lamp Driver module, the name of the lamp it drives,
the MC14514 decoder IC associated with the SCR along with the BINARY input signals (AD0, AD1, AD2, AD3) and output pin,
the CD4050 driver IC associated with the SCR along with the input and output pins,
and the name of the 2K Ohm resistor (red/black/red) connected to the decoder output.

MCR-106
SCR
Lamp MC14514
Decoder
CD4050
Driver*
2K Ohm
Resistor
Q1 Strike Value 5000 U1, 1000/18 U5, 14/15 R6
Q2 Strike Value 30,000 U1, 1001/17 U5, 11/12 R5
Q3 Shoot Again U1, 1010/20 U5, 9/10 R4
Q8 "R" U1, 0011/8 U5, 3/2 R16
Q9 "E" U1, 0100/7 U5, 5/4 R17
Q10 Pin "1" U1, 0101/6 U5, 7/6 R18
Q15 High Game To Date U2, 1100/14 U6, 14/15 R19
Q16 Ball In Play U1, 1100/14 U6, 11/12 R20
Q17 Strike Value "SPEC" U2, 1001/17 U6, 9/10 R21
Q22 Pin "2" U2, 0101/6 U6, 3/2 R31
Q23 Match U2, 1010/20 U6, 5/4 R32
Q24 Strike Value 10,000 U2, 1000/18 U6, 7/6 R33
    
MCR-106
SCR
Lamp MC14514
Decoder
CD4050
Driver*
2K Ohm
Resistor
Q33 Game Over U3, 1100/14 U7, 14/15 R34
Q34 "B" Top Center U2, 0100/7 U7, 9/10 R35
Q35 "A" U2, 0011/8 U7, 11/12 R36
Q40 SPSA Playfield U3, 1001/17 U7, 3/2 R46
Q41 Bottom Bumper U3, 1001/17 U7, 7/6 R48
Q42 Strike Value 15,000 U3, 1000/18 U7, 5/4 R47
Q47 Tilt U4, 1100/14 U8, 14/15 R49
Q48 "C" Top Right U3, 0100/7 U8, 9/10 R51
Q49 "P" U3, 0011/8 U8, 11/12 R52
Q54 "S" U4, 0011/8 U8, 3/2 R58
Q55 "A" Top Left U4, 0100/7 U8, 5/4 R59
Q56 Strike Value 20,000 U4, 1000/18 U8, 7/6 R60

*NOTE*
The AS-2518-23 Lamp Driver Module does not use the CD4050 hex driver chips
so ignore that column if that's the style of lamp driver you have.


NOTES
I got all this information from the schematics and pretty much copied it verbatim.

If you notice any mistakes (I'm only human), please let me know and I'll fix it up.

If you need to know which solenoid driver transistor goes to which solenoid driver board connector, Click Here.

If you need to know which lamp SCR goes to which lamp driver board connector, Click Here.



[Steve's Page] [Pinball] [Bally] [Bally Solenoid/Lamp Drivers]



Created 5/3/08 - Last Modified 5/3/08 - Steve Kulpa Mail Icon Nolensville, TN
Remove the NO_S*P*A*M_ to reply

All content posted on this page, unless otherwise noted, is the exclusive property of Steve Kulpa
and may not be borrowed, copied, downloaded, reproduced, or pilfered in any way with out prior permission