Everything You Ever Wanted to Know About
Kiss Solenoid and Lamp Assignments

The following table lists each driver transistor, the coil it drives,
the pre-driver IC associated with it along with the pin numbers of the base and collector (respectively),
and the decoder IC BINARY input signals (ABCD) and output pin number.

TIP-102
Transistor
Coil CA3081
Pre-Driver IC
74L154
Decoder*
Q1 Not Used U1, 16, 1 0001/2
Q2 Not Used U1, 3, 2 0000/1
Q3 Knocker U1, 6, 4 0101/6
Q4 Outhole Kicker U1, 8, 7 0110/7
Q5 Not Used U1, 13, 14 0010/3
Q6 Not Used U1, 11, 12 0011/4
Q7 Not Used U1, 10, 9 0100/5
Q8 Not Used U3, 16, 1 0111/8
Q9 Bottom Pop Bumper U3, 3, 2 1010/11
Q10 Left Slingshot U3, 8, 7 1011/13
Q11 Drop Target Reset U3, 6, 4 1101/15
Q12 Right Slingshot U3, 10, 9 1100/14
Q13 Left Pop Bumper U3, 11, 12 1000/9
Q14 Right Pop Bumper U3, 13, 14 1001/10
Q15 Flipper Enable Relay U4, 3, 2 n/a
Q16 Not Used U4, 8, 7 1110/16
Q17 Gate U4, 10, 9 n/a
Q18 Not Used U4, 11, 12 n/a
Q19 Coin Lockout U4, 13, 14 n/a

*NOTE*
"n/a" Decoder info indicates these drivers get their signals as continuous
solenoids directly from the MPU at A4J4-5, 6, 7, and 8 and not the Decoder IC.


This table lists all the 2N5060 SCRs on the Lamp Driver module, the name of the lamp it drives,
the decoder IC associated with the SCR along with the BINARY input signals (AD0, AD1, AD2, AD3) and output pin,
and the name of the 2K Ohm resistor (red/black/red) connected to the decoder output.

2N5060
SCR
Lamp MC14514
Decoder
2K Ohm
Resistor
Q4 "A" Target U1, 0111/4 R7
Q5 Not Used U1, 1101/13 R3
Q6 40,000 Bonus U1, 1110/16 R2
Q7 Right Spinner U1, 1011/19 R1
Q11 Red KISS Amber Arrow U1, 0110/5 R8
Q12 White "K" U1, 0001/9 R12
Q13 Yellow "K" U1, 0010/10 R13
Q14 Red "K" U1, 0000/11 R14
Q18 Light A Line When Lit U2, 1101/13 R15
Q19 80,000 Colossal U2, 1110/16 R11
Q20 "C" Target U3, 0111/4 R10
Q21 Left Spinner U2, 1011/19 R9
Q25 "B" Target U2, 0111/4 R22
Q26 White KISS Amber Arrow U2, 0110/5 R23
Q27 White "I" U2, 0001/9 R27
Q28 Yellow "I" U2, 0010/10 R28
Q29 Red "I" U2, 0000/11 R29
Q30 Open Gate When Lit U3, 1101/13 R30
    
2N5060
SCR
Lamp MC14514
Decoder
2K Ohm
Resistor
Q31 KISS Special U3, 1110/16 R26
Q32 Yellow KISS Amber Arrow U3, 0110/5 R25
Q36 Red "S" (Left) U3, 0000/11 R45
Q37 Left "S" Amber Arrow U3, 0101/6 R38
Q38 White "S" (Left) U3, 0001/9 R41
Q39 Right Out Special U3, 1011/9 R24
Q43 A-B-C-D Special U4, 1101/13 R44
Q44 Yellow "S" (Left) U3, 0010/10 R43
Q45 2X Bonus U4, 1110/16 R42
Q46 A-B-C-D Target 2X U4, 1001/17 R40
Q50 White "S" (Right) U4, 0001/9 R55
Q51 Yellow "S" (Right) U4, 0010/10 R56
Q52 Credit Indicator U4, 1010/20 R37
Q53 Left Out Special U4, 1011/19 R39
Q57 Red "S" (Right) U4, 0000/11 R57
Q58 "D" Target U4, 0111/4 R50
Q59 Green KISS Amber Arrow U4, 0110/5 R53
Q60 Right "S" Amber Arrow U4, 0101/6 R54


This table lists all the MCR-106 SCRs on the Lamp Driver module, the name of the lamp it drives,
the MC14514 decoder IC associated with the SCR along with the BINARY input signals (AD0, AD1, AD2, AD3) and output pin,
the CD4050 driver IC associated with the SCR along with the input and output pins,
and the name of the 2K Ohm resistor (red/black/red) connected to the decoder output.

MCR-106
SCR
Lamp MC14514
Decoder
CD4050
Driver*
2K Ohm
Resistor
Q1 "K" Rollover U1, 1000/18 U5, 14/15 R6
Q2 A-B-C-D Target Extra Ball U1, 1001/17 U5, 11/12 R5
Q3 Shoot Again U1, 1010/20 U5, 9/10 R4
Q8 Green "K" U1, 0011/8 U5, 3/2 R16
Q9 Red Arrow U1, 0100/7 U5, 5/4 R17
Q10 "K" Amber Arrow U1, 0101/6 U5, 7/6 R18
Q15 High Score To Date U2, 1100/14 U6, 14/15 R19
Q16 Ball In Play U1, 1100/14 U6, 11/12 R20
Q17 Top & Bottom Pop Bumper U2, 1001/17 U6, 9/10 R21
Q22 "I" Amber Arrow U2, 0101/6 U6, 3/2 R31
Q23 Match U2, 1010/20 U6, 5/4 R32
Q24 "I" Rollover U2, 1000/18 U6, 7/6 R33
    
MCR-106
SCR
Lamp MC14514
Decoder
CD4050
Driver*
2K Ohm
Resistor
Q33 Game Over U3, 1100/14 U7, 14/15 R34
Q34 White Arrow U2, 0100/7 U7, 9/10 R35
Q35 Green "I" U2, 0011/8 U7, 11/12 R36
Q40 Same Player Shoots Again U3, 1001/17 U7, 3/2 R46
Q41 Left & Right Pop Bumper U3, 1001/17 U7, 7/6 R48
Q42 "S" Inner Rollover U3, 1000/18 U7, 5/4 R47
Q47 Tilt U4, 1100/14 U8, 14/15 R49
Q48 Yellow Arrow U3, 0100/7 U8, 9/10 R51
Q49 Green "S" (Left) U3, 0011/8 U8, 11/12 R52
Q54 Green "S" (Right) U4, 0011/8 U8, 3/2 R58
Q55 Green Arrow U4, 0100/7 U8, 5/4 R59
Q56 "S" Outer Rollover U4, 1000/18 U8, 7/6 R60

*NOTE*
The AS-2518-23 Lamp Driver Module does not use the CD4050 hex driver chips
so ignore that column if that's the style of lamp driver you have.



This table lists all the MCR-106 SCRs on the Auxiliary Lamp Driver (AS-2518-43), the name of the lamp it drives,
the MC14555 Dual Binary to 1-of-4 Decoder IC associated with it, along with the BINARY input signals (AB) and the output pin,
and the 2K Ohm resistor (red/black/red) connected to the decoder output.

MCR-106
SCR
Lamp MC14555
Decoder
2K Ohm
Resistor
Q1 KISS 1 U2B, 00/12 R9
Q2 KISS 2 U2B, 01/11 R10
Q3 KISS 3 U2B, 10/10 R11
Q4 KISS 5 & 6 U2A, 10/6 R12
Q5 KISS 3 & 4 U2A, 01/5 R13
Q6 KISS 1 & 2 U2A, 00/4 R14
    
MCR-106
SCR
Lamp MC14555
Decoder
2K Ohm
Resistor
Q7 KISS 1 & 2 U3B, 00/12 R15
Q8 KISS 3 U3B, 01/11 R16
Q9 KISS 4 U3B, 10/10 R17
Q10 KISS 4 U3A, 10/6 R18
Q11 KISS 3 U3A, 01/5 R19
Q12 KISS 1,2 U3A, 00/12 R20



NOTES
I got all this information from the schematics and pretty much copied it verbatim.

If you notice any mistakes (I'm only human), please let me know and I'll fix it up.

If you need to know which solenoid driver transistor goes to which solenoid driver board connector, Click Here.

If you need to know which lamp SCR goes to which lamp driver board connector, Click Here.



[Steve's Page] [Pinball] [Bally] [Bally Solenoid/Lamp Drivers]



Created 9/16/02 - Last Modified 2/24/10 - Steve Kulpa Mail Icon Nolensville, TN
Remove the NO_S*P*A*M_ to reply

All content posted on this page, unless otherwise noted, is the exclusive property of Steve Kulpa
and may not be borrowed, copied, downloaded, reproduced, or pilfered in any way with out prior permission